show gtpu-service This chapter includes the show gtpu-service command output tables. show gtpu-service all show gtpu-service all Command Output Descriptions Field Description Service name The name of the service configured in the named context. Context The name of the context where the service is configured. State The status of the service, i.e., “Initiated”. Echo Interval The duration between the sending of GTP-U echo messages. Include UDP Port Ext.Hdr Indicates if an extention header, in the GTP-U packet header, allowing for error indication messages will be added. Max-retransmissions The number of user data packet request message retransmissions that can be sent before an error condition is established. Retransmission Timeout The number of seconds between the re-sending of GTP-U echo messages Path Failure Detection on gtp msgs Identifies what type of messages the path failure indication error is applied. Address List Identifies the IP address used to transmit/receive GTP-U packets. Suppress Error-Indication generation Indicate if the error indication will be suppressed upon the receipt of a user data packet for a non-existent session. Path Failure Detection on gtp echo msgs Identifies if the path failure detection is enabled upon reaching the maximum number of echo retransmissions.
